| The Series 4700
UNITRACK Card Guides incorporate the patented spring finger action of
UNITRACK Card Guides to accommodate p.c. cards up to 6" long!
Now "big" boards can be held with the card guide that provides
vibration and shock damping for p.c. cards 1/16" to 1/8" thick.
Dimensionally stable polycarbonate plastic segments are simply slid
into the guide bar to make any length card guide needed.
Mounting clips lock the segments within the guide bar, as well as
provide a positive mounting method. Other special mounting
arrangements are available, such as bonding, riveting, etc...
Series 4700 UNTIRACK Card Guides are
available as assemblies to exact lengths or as individual parts to be
assembled by the customer. Although many large p.c. cards are
mounted to a solid chassis, the rigid guide bar makes it possible to
easily span open spaces. |
|
 |
NOTE:
Length of Guide bar is 1/2" longer than Dash #. Mounting
hole dimensions are .875" longer than Dash #.
EXAMPLE:
UN4718-14 would be an assembled unit of: (1) GB4718 14.5"
long; SG4700 segments and (2) MC4700 mounting clips. Mounting
hole dimensions would be 14.875".
Standard spacing of
holes, studs or swage nuts.
- Guides up to 6" long: 2 holes, 2
studs or 2 swage nuts spaced 1/2" from each end of the guide.
- Guides up to 10" long: 3 holes, 3
studs or 2 swage nuts evenly spaced with the end holes or hardware
1/2" from each end of the guide.
- Guides over 10" long: 4 holes, 4
studs or 4 swage nuts evenly spaced with the end holes or hardware
1/2" from each end of the guide.
|
